CANDLE CARE FOR CONTAINER CANDLES
- Allow the candle to burn until the wax melts all the way to the edge of the vessel creating a full melt pool. This is to prevent the candle from tunnelling and may take between 30min to 120 minutes depending on the size of vessel.
- Trim your wick to 1/4 inch between each burn. This will ensure you get a steady flame, even burn and will help limit sooting / mushrooming of wick. This can be done using wick trimmers that are available to purchase here. Wick Trimmers have a gorgeous Matte Black finish and will trim and catch your candles residue, keeping your candles clean, helping them to last longer and also have a smoother burn.
- Keep candle free of any foreign materials including matches and wick trimmings.
- Only burn the candle on a level, fire resistant surface.
Warning
To prevent fire, hazard or injury burn candle within sight. Keep away from drafts and vibrations. Keep out of reach for children and pets. Never burn candle on or near anything that can catch fire. Never leave a burning candle unattended. Jar may become hot.
CANDLE CARE FOR PILLAR CANDLES
- Always place candle on a dish or candle plate that will collect any wax that may drip - as they will drip!
- Avoid placing near flammable objects
- Always remember to blow your candle out when leaving the room
- Keep in mind, these candles are meant to drip out.
- When not in use, place your candle away from direct sunlight and nearby heat sources
- Trim wick to 2-3cm from the surface of the wax before each light to ensure a constant smoke free flame
- Keep candle free of any foreign materials including matches and wick trimmings.
- Only burn the candle on a level, fire resistant surface.
- Extinguish candle when less than 1 cm of wax remains.
Warning
To prevent fire, hazard or injury burn candle within sight at all times. Keep away from drafts and vibrations. Keep out of reach for children and pets. Never burn candle on or near anything that can catch fire. Never leave a burning candle unattended. Candle plate/dish may become hot.
CARE AND INSTRUCTIONS FOR BULLET DIFFUSER
Instructions for use;
- Twist and remove wooden top. Carefully remove the clear plastic stopper from the top of the bottle and replace wooden top.
- Tip the bottle upside down for 1-2 seconds so that the fragrance absorbs into the wooden lid. Do not over saturate timber with fragrance. Replace plastic stopper, then secure wooden lid Hang in your car, office, around the home, or anywhere you want to freshen up the smell.
*Take care not to spill liquid when refreshing fragrance. Remove from car and tighten lid before tipping upside down.
DO NOT USE WHERE DRIVERS VISABILITY OR VIEW MAY BE OBSCURED. KEEP OUT OF REACH OF CHILDREN. DO NOT LEAVE BOTTLE LYING ON SURFACE, HANG IT AT ALL TIMES OR LEAKING WILL OCCURE.
If leakage does occur, clean surface immediately. To avoid breakage, remove bottle if travelling over bumpy surfaces. Do not allow the lid or string or liquid contents to come into contact with plastics or painted surfaces. Avoid contact with eyes, skin or clothing. Prolonged exposure to high interior temperature must be avoided. If outside temperature exceeds 30 degrees Celsius remove bottle and place in sealed container to avoid leakage or damage. Manufacturer takes no responsibility for improper use